WEEK 6 ( methodology )

This project is used 90% of program circuit related with electronic engineering that had studied. The input is the coding develop based on user/customer design requirement. The coding used C language with compile in the HEX.files. MPLAB IDE is used as a software to run this programming.

There are two high possible processor to be considered for the controller.  PIC16F877A which has 40 pin for input and output. This is enough to make a 125 led’s run from this PIC. The second choice is use Arduino Controller Board. This controller is one of the latest technology produce from electronic field. Arduino can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators. The microcontroller on the board is programmed using the Arduino Programming Language (based on Wiring) and the Arduino development environment (based on Processing). Arduino projects can be stand-alone or they can communicate with software running on a computer. 

  

The output for this project is a LED cube. 125 led’s with use 5x5x5 will display all of the interactive design. The most important thing on the output side is to find a suitable color for LED. At this project, blue crystal LED or red crystal LED will be used for the output side. It is because, the both colors will make more eye catching to see, more brightness and very easy to find this type of LED.